X
Équipement De Construction
Camions et remorques
Matériel De Levage
Équipement Agricole
Véhicules
Enchères en Direct
Refurbished Transmitter (Sonde) F5Dpx 19/12 for DIGITRAK F5 Locator
Prix
AED
7,327
$
1,995
€
1,864
£
1,549
رس
7,483
Condition
Remis à neuf
1
de un
2
Refurbished Transmitter (Sonde) F5Dpx 19/12 for DIGITRAK F5 Locator
1
de un
2
Survivre
La Description
Transmitter (Sonde) F5Dpx 19/12 For DIGITRAK F5 Locator Dual Frequency Blue with 0.1% Pitch (19.2/12 kHz)
Depth Range: 65ft/19.8m.
Fully tested and inspected transmitter (sonde) compatible with:
DIGITRAK F5
Dimensions: 1.25" x 15" (3.2 cm x 38 cm)
Batteries: 2 C size Alkaline batteries or 1 Supercell
The long-range F5Dpx 19/12 Fluid Pressure Transmitter provides downhole fluid pressure monitoring up to 250 psi (1725 kPa). The drilling fluid pressure is measured through sensor ports located on the front end cap on either side of the index slot. The housings must allow fluid to flow to the sensor ports for measurement of the drilling fluid pressure.
Transmitter (Sonde) F5Dpx 19/12 For DIGITRAK F5 Locator Dual Frequency Blue with 0.1% Pitch (19.2/12 kHz)Depth Range: 65ft/19.8m.
Fully tested and inspected transmitter (sonde) compatible with:
DIGITRAK F5
Dimensions: 1.25" x 15" (3.2 cm x 38 cm)
Batteries: 2 C size Alkaline batteries or 1 Supercell
The long-range F5Dpx 19/12 Fluid Pressure Transmitter provides downhole fluid pressure monitoring up to 250 psi (1725 kPa). The drilling fluid pressure is measured through sensor ports located on the front end cap on either side of the index slot. The housings must allow fluid to flow to the sensor ports for measurement of the drilling fluid pressure.
Depth Range: 65ft/19.8m.
Fully tested and inspected transmitter (sonde) compatible with:
DIGITRAK F5
Dimensions: 1.25" x 15" (3.2 cm x 38 cm)
Batteries: 2 C size Alkaline batteries or 1 Supercell
The long-range F5Dpx 19/12 Fluid Pressure Transmitter provides downhole fluid pressure monitoring up to 250 psi (1725 kPa). The drilling fluid pressure is measured through sensor ports located on the front end cap on either side of the index slot. The housings must allow fluid to flow to the sensor ports for measurement of the drilling fluid pressure.
Montre plus Montrer moins
