X
معدات ثقيلة
الشاحنات والمقطورات
معدات الرفع
معدات الزراعية
مركبة تجارية
مزادات مباشرة
Refurbished Transmitter (Sonde) F5Dpx 19/12 for DIGITRAK F5 Locator
Refurbished Transmitter (Sonde) F5Dpx 19/12 for DIGITRAK F5 Locator
السعر
AED
٧,٣٢٧
$
١,٩٩٥
€
١,٨٦٤
£
١,٥٤٩
رس
٧,٤٨٣
حالة المعدة
تم تجديده
١
من
٢
Refurbished Transmitter (Sonde) F5Dpx 19/12 for DIGITRAK F5 Locator
١
من
٢
نظرة عامة
الوصف
Transmitter (Sonde) F5Dpx 19/12 For DIGITRAK F5 Locator Dual Frequency Blue with 0.1% Pitch (19.2/12 kHz)
Depth Range: 65ft/19.8m.
Fully tested and inspected transmitter (sonde) compatible with:
DIGITRAK F5
Dimensions: 1.25" x 15" (3.2 cm x 38 cm)
Batteries: 2 C size Alkaline batteries or 1 Supercell
The long-range F5Dpx 19/12 Fluid Pressure Transmitter provides downhole fluid pressure monitoring up to 250 psi (1725 kPa). The drilling fluid pressure is measured through sensor ports located on the front end cap on either side of the index slot. The housings must allow fluid to flow to the sensor ports for measurement of the drilling fluid pressure.
Transmitter (Sonde) F5Dpx 19/12 For DIGITRAK F5 Locator Dual Frequency Blue with 0.1% Pitch (19.2/12 kHz)Depth Range: 65ft/19.8m.
Fully tested and inspected transmitter (sonde) compatible with:
DIGITRAK F5
Dimensions: 1.25" x 15" (3.2 cm x 38 cm)
Batteries: 2 C size Alkaline batteries or 1 Supercell
The long-range F5Dpx 19/12 Fluid Pressure Transmitter provides downhole fluid pressure monitoring up to 250 psi (1725 kPa). The drilling fluid pressure is measured through sensor ports located on the front end cap on either side of the index slot. The housings must allow fluid to flow to the sensor ports for measurement of the drilling fluid pressure.
Depth Range: 65ft/19.8m.
Fully tested and inspected transmitter (sonde) compatible with:
DIGITRAK F5
Dimensions: 1.25" x 15" (3.2 cm x 38 cm)
Batteries: 2 C size Alkaline batteries or 1 Supercell
The long-range F5Dpx 19/12 Fluid Pressure Transmitter provides downhole fluid pressure monitoring up to 250 psi (1725 kPa). The drilling fluid pressure is measured through sensor ports located on the front end cap on either side of the index slot. The housings must allow fluid to flow to the sensor ports for measurement of the drilling fluid pressure.
أظهر المزيد عرض أقل
تواصل مع البائع
